-
Materials
Die-cast aluminum A380 faceplate, extruded housing with hardened 6063 aluminum, die-cast aluminum A380 install base plate, stainless steel hardware, anodized aluminum install base, and polycarbonate base protector.
-
Lamp
Integrated Xicato® LED module. Next-Generation Corrected Cold Phosphor Technology® keeps phosphors cool for maintained light quality and very tight color consistency (within 1 x 2 MacAdam ellipses). Up to 100+ lumens per watt at operating conditions. CCT range from 2,700K to 4,000K with lumen outputs between 700 and 2,000 lumens.
-
Optics
Preinstalled throw settings for short (7 ft/2.1 m), medium (9 ft/2.7 m), and long (11 ft/3.4 m) throw patterns. Setting field serviceable. Average horizontal beam angle is 65°. Type II or Type III distributions, depending on selected specifications.
-
Socket
Socket contains MoistureBlock™ technology, preventing moisture from wicking into sealed areas of the fixture via the wiring.
-
Wiring
UL1015 105°C 600V; 18/3 (1 mm) for phase dim driver and 18/5 (1 mm) for 0-10V driver. 50" (127 cm) in total lead length, with 15" (38 cm) exposed.
-
Power
Three input power options: 1) standard voltage using 120V input with phase dimming, 2) universal voltage using 110V to 277V with 0-10V dimming, or 3) high voltage using 220V to 240V
-
Mounting Kit
Specify mounting kit separately using part number: MKRSE26. Base plate included with 32° of alignment (16° in each direction). Polycarbonate install spacer included to protect bottom finish during installation. Four (4) 10" (25 cm) L-bolts included with supporting hex nuts and washers.
-
Lens
Tempered glass lens with shock resistance and high tolerance for thermal expansion and stress. Glass lens sandblast frosted.
-
Lamp Compartment
Die-cast aluminum housing with capacity up to 2,000 lumen module. Installation requires no access to LED module, optics, or driver, retaining factory seal for added protection.
-
Finish
Two-layer protection of sulfuric acid anodization and polyester TGIC powder coat, providing superior outdoor weathering in all conditions. Tested to ASTM standards.
-
Hardware
⅜"-16 X 10" L-bolts (4), 10-32 X 1 ½ (1 or 2, depending on selected specifications), ¼"-20 x 40" threaded rod (1)
-
Orientation
Three orientation options: 1) Ground Plane (GP): singlesided ground illumination 2) Ground/Ground (GG): double-sided ground illumination 3) Ground/Vertical (GV): double-sided illumination with one side illuminating the ground and opposing side illuminating upward.
-
Weight
50.0 lbs. (22.7 kg).
-
Control
ZDlink™ or ZDClink™ utilizes Luxor® technology to zone light fixtures in up to 250 groups, dim each group in 1% increments between 0 and 100%, or change to one of 30,000 colors with RGBW LEDs. Specify the Luxor Cube for zoning and/ or dimming the sCrest-13 with the ZDlink or ZDClink.
-
Ambient Operating Temperature
L07: -25°C to 60°C (-13°F to 140°F)
L10: -25°C to 55°C (-13°F to 131°F)
L13: -25°C to 50°C (-13°F to 122°F)
L20: -25°C to 45°C (-13°F to 113°F)
-
Sustainability
Innovation meets conservation in the design and manufacturing of our products. Where we can, we use recycled materials while maintaining the highest quality and functionality. Our LED products provide high quality light at optimal energy efficiency, lifespan, and durability.
-
Manufacturing
ISO 9001:2015 certified facility
-
Installation Requirements
Luminaire designed for installation onto a horizontal surface at ground level.
-
Warranty
5-year limited warranty
